Advocate ClickTight › fit in › Tesla Model S
Will the Britax Advocate ClickTight fit in a 2014–2024 Tesla Model S?
The Advocate ClickTight is about 20.5" wide; the Model S's usable rear bench is about 52". It fits one rear position comfortably. Three across is tight (61.5" needed vs 52").
What fits this Model S
- One seat, rear position: Yes. The Advocate ClickTight installs in an outboard rear position of a 2014–2024 Tesla Model S with room to spare.
- Three across: Tight — three need ~61.5" against only ~52". A narrower seat is the better bet.
- Modes this seat covers: rear-facing → forward-facing.
- LATCH: lower anchors up to 40 lb; the Model S has 2 lower-anchor positions.
Common questions
Will the Britax Advocate ClickTight fit in a 2014–2024 Tesla Model S?
Yes — the Britax Advocate ClickTight (20.5" wide) fits a single rear seating position in a 2014–2024 Tesla Model S. Three across is tight — its rear bench is about 52" and three of these would need 61.5".
Can you fit three Advocate ClickTights across a Model S?
Probably not — three Advocate ClickTights need about 61.5" but the Model S's usable bench is only about 52". Consider a narrower seat — see our narrowest-seats guide.
Sources: seat ratings & modes — NHTSA (pulled 2026-06-18); dimensions — manufacturer specs and owner measurements. Informational only — built from NHTSA public car-seat ratings and published seat/vehicle dimensions. This is not a safety certification and not a substitute for the seat and vehicle manuals. Always confirm the fit and install yourself before every trip.